Notebook

Add time series to `System`¶

Originally Contributed by: Clayton Barrows

Introduction¶

An example of how to parse add time series data to a System using PowerSystems.jl

For example, a System created by parsing a MATPOWER file doesn't contain any time series data. So a user may want to add time series to the System

Dependencies¶

Let's use the 5-bus dataset we parsed in the MATPOWER example

In [1]:

using SIIPExamples
using PowerSystems
using JSON3

pkgpath = dirname(dirname(pathof(SIIPExamples)))
include(joinpath(pkgpath, "test", "2_PowerSystems_examples", "02_parse_matpower.jl"))

[ Info: extending matpower format with data: areas 1x3
[ Info: extending matpower format with data: gen_name 7x4
[ Info: extending matpower format by appending matrix "gen_name" in to "gen"
[ Info: reversing the orientation of branch 6 (4, 3) to be consistent with other parallel branches
[ Info: the voltage setpoint on generator 4 does not match the value at bus 4
[ Info: the voltage setpoint on generator 1 does not match the value at bus 1
[ Info: the voltage setpoint on generator 5 does not match the value at bus 10
[ Info: the voltage setpoint on generator 2 does not match the value at bus 1
[ Info: the voltage setpoint on generator 3 does not match the value at bus 3
[ Info: removing 1 cost terms from generator 4: [4000.0, 0.0]
[ Info: removing 1 cost terms from generator 1: [1400.0, 0.0]
[ Info: removing 1 cost terms from generator 5: [1000.0, 0.0]
[ Info: removing 1 cost terms from generator 2: [1500.0, 0.0]
[ Info: removing 3 cost terms from generator 6: Float64[]
[ Info: removing 3 cost terms from generator 7: Float64[]
[ Info: removing 1 cost terms from generator 3: [3000.0, 0.0]
┌ Info: Constructing System from Power Models
│   data["name"] = "nesta_case5_pjm"
└   data["source_type"] = "matpower"
[ Info: Reading bus data
[ Info: Reading generator data
[ Info: Reading branch data
┌ Warning: Rate 1200.0 MW for bus2-bus3-i_4 is larger than the max expected in the range of (min = 134.0, max = 145.0).
└ @ PowerSystems ~/.julia/packages/PowerSystems/N2l8o/src/utils/IO/branchdata_checks.jl:148
┌ Warning: Rate 200.0 MW for bus1-bus2-i_1 is larger than the max expected in the range of (min = 134.0, max = 145.0).
└ @ PowerSystems ~/.julia/packages/PowerSystems/N2l8o/src/utils/IO/branchdata_checks.jl:148
┌ Warning: Rate 200.0 MW for bus1-bus4-i_2 is larger than the max expected in the range of (min = 134.0, max = 145.0).
└ @ PowerSystems ~/.julia/packages/PowerSystems/N2l8o/src/utils/IO/branchdata_checks.jl:148
┌ Warning: Rate 200.0 MW for bus4-bus5-i_7 is larger than the max expected in the range of (min = 134.0, max = 145.0).
└ @ PowerSystems ~/.julia/packages/PowerSystems/N2l8o/src/utils/IO/branchdata_checks.jl:148
┌ Warning: Rate 1000.0 MW for bus1-bus5-i_3 is larger than the max expected in the range of (min = 134.0, max = 145.0).
└ @ PowerSystems ~/.julia/packages/PowerSystems/N2l8o/src/utils/IO/branchdata_checks.jl:148
[ Info: Reading branch data
[ Info: Reading DC Line data
[ Info: Reading storage data

Out[1]:

System

Base Power: 100.0

Components

Num components: 30

9 rows × 3 columns

	ConcreteType	SuperTypes	Count
	String	String	Int64
1	Arc	Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	6
2	Area	AggregationTopology <: Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	1
3	Bus	Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5
4	Line	ACBranch <: Branch <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5
5	LoadZone	AggregationTopology <: Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	1
6	PhaseShiftingTransformer	ACBranch <: Branch <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	2
7	PowerLoad	StaticLoad <: ElectricLoad <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	3
8	RenewableDispatch	RenewableGen <: Generator <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	2
9	ThermalStandard	ThermalGen <: Generator <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5

TimeSeriesContainer

Components with time series data: 0

Total StaticTimeSeries: 0

Total Forecasts: 0

Resolution: 0 seconds

Define pointers to time series files¶

For example, if we want to add a bunch of time series files, say one for each load and one for each renewable generator, we need to define pointers to each .csv file containing the time series in the following format (PowerSystems.jl also supports a CSV format for this file)

In [2]:

FORECASTS_DIR = joinpath(base_dir, "forecasts", "5bus_ts")
fname = joinpath(FORECASTS_DIR, "timeseries_pointers_da.json")
open(fname, "r") do f
    JSON3.@pretty JSON3.read(f)
end

[
  {
                       "component_name": "SolarBusC",
                 "normalization_factor": 1,
                                 "name": "max_active_power",
     "scaling_factor_multiplier_module": "PowerSystems",
                            "data_file": "./gen/Renewable/PV/da_solar5.csv",
                           "resolution": 3600,
                               "module": "PowerSystems",
                             "category": "Generator",
            "scaling_factor_multiplier": "get_max_active_power",
                           "simulation": "DAY_AHEAD",
                                 "type": "SingleTimeSeries"
  },
  {
                       "component_name": "WindBusA",
                 "normalization_factor": 1,
                                 "name": "max_active_power",
     "scaling_factor_multiplier_module": "PowerSystems",
                            "data_file": "./gen/Renewable/WIND/da_wind5.csv",
                           "resolution": 3600,
                               "module": "PowerSystems",
                             "category": "Generator",
            "scaling_factor_multiplier": "get_max_active_power",
                           "simulation": "DAY_AHEAD",
                                 "type": "SingleTimeSeries"
  },
  {
                       "component_name": "bus2",
                 "normalization_factor": 1,
                                 "name": "max_active_power",
     "scaling_factor_multiplier_module": "PowerSystems",
                            "data_file": "./load/da_load5.csv",
                           "resolution": 3600,
                               "module": "PowerSystems",
                             "category": "ElectricLoad",
            "scaling_factor_multiplier": "get_max_active_power",
                           "simulation": "DAY_AHEAD",
                                 "type": "SingleTimeSeries"
  },
  {
                       "component_name": "bus3",
                 "normalization_factor": 1,
                                 "name": "max_active_power",
     "scaling_factor_multiplier_module": "PowerSystems",
                            "data_file": "./load/da_load5.csv",
                           "resolution": 3600,
                               "module": "PowerSystems",
                             "category": "ElectricLoad",
            "scaling_factor_multiplier": "get_max_active_power",
                           "simulation": "DAY_AHEAD",
                                 "type": "SingleTimeSeries"
  },
  {
                       "component_name": "bus4",
                 "normalization_factor": 1,
                                 "name": "max_active_power",
     "scaling_factor_multiplier_module": "PowerSystems",
                            "data_file": "./load/da_load5.csv",
                           "resolution": 3600,
                               "module": "PowerSystems",
                             "category": "ElectricLoad",
            "scaling_factor_multiplier": "get_max_active_power",
                           "simulation": "DAY_AHEAD",
                                 "type": "SingleTimeSeries"
  }
]

Read and assign time series to `System` using these parameters.¶

In [3]:

add_time_series!(sys, fname)
sys

Out[3]:

System

Base Power: 100.0

Components

Num components: 30

9 rows × 3 columns

	ConcreteType	SuperTypes	Count
	String	String	Int64
1	Arc	Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	6
2	Area	AggregationTopology <: Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	1
3	Bus	Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5
4	Line	ACBranch <: Branch <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5
5	LoadZone	AggregationTopology <: Topology <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	1
6	PhaseShiftingTransformer	ACBranch <: Branch <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	2
7	PowerLoad	StaticLoad <: ElectricLoad <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	3
8	RenewableDispatch	RenewableGen <: Generator <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	2
9	ThermalStandard	ThermalGen <: Generator <: StaticInjection <: Device <: Component <: InfrastructureSystemsComponent <: InfrastructureSystemsType <: Any	5

TimeSeriesContainer

Components with time series data: 5

Total StaticTimeSeries: 5

Total Forecasts: 0

Resolution: 60 minutes

This notebook was generated using Literate.jl.

Add time series to System¶

Introduction¶

Dependencies¶

System

Components

TimeSeriesContainer

Define pointers to time series files¶

Read and assign time series to System using these parameters.¶

System

Components

TimeSeriesContainer

Add time series to `System`¶

Read and assign time series to `System` using these parameters.¶